ThinLine Trifecta Half Pad with Sheepskin Rolls

This sheepskin trim half pad is shimmable for customized saddle fit and shims are made of the same trademark foam. The shaped wither profile provides clearance while the ThinLine creates a spine-free channel.

95% shock absorption is provided by the ThinLine foam which also minimizes rider movement for a quieter seat.

Sleek design fits under both off the rack and custom saddles allowing for a close contact feel. ThinLine’s open-cell technology provides breath-ability and a non-slip saddle fit.

The Sheepskin trim gives riders the look of a full sheepskin pad with more protection and less bulk.

Trifecta Lays flat to easily combine with other base pads.
Model Upgrades

Now with a mesh spine band which improves breathability.
The wither profile was raised to accommodate more top lines.
Improved cotton base higher quality cotton with denser weave and light wool fill.
Featuring more durable billet straps.
Sheepskin rolls are removed from the bottom of the pad, allowing for a clean, even fit.

We added more ThinLine to this customer favorite!

Now with a longer drop. The ThinLine panel has been enlarged to protect below the stirrup bar. The larger pocket allows you to shim more behind the point of the shoulder.



This is hands down one of the best products we do. You will feel all the sensations of your horses’ back muscles while enjoying the shock absorption and non-slip features of the trademark ThinLine foam. Balance, comfort, and security can all be yours in this half pad. You will find yourself sitting correctly, developing great core strength while enjoying close but quiet communication with your horse. Horses love this half pad – they feel unified with their rider. So go ahead, it is time to have the ride of your life.

Each pad comes with a layer of ThinLine on top. Use the full shims to double your ThinLine protection or customize them to create a pair of front shims, a pair of bridging shims, and a pair of rear shims. Up to 3 layers of shims can be utilized for the ultimate in saddle fit & shock-absorption.



Full Shim: A pair of ThinLine shims running the full panel will create extra protection of full-length lift is needed.

Trimmed to Fit: Trim the full shim to create a pair of front shims, a pair of bridging shims, and a pair of rear shims. Guideline dots show you where to trim. Use as needed to fine tune your saddle fit. You can modify the ThinLine shims with a pair of scissors and create all the shims you need.


Saddle Pad Measurements

Small:
20″ total spine length | 15.5″ between the rolls | 16″ across seat

Medium:
23″ total spine length | 18.25″ spine between the rolls | 18″ across seat

Large:
25″ total spine length | 19.5″ between the rolls | 18.5″ across seat

XL:
27″ total spine length | 22″ between the rolls