Reprodis HLD4i High Level Instrument Disinfectant

MATERIALS COMPATIBILITY

• No adverse impact on metallic or non-metallic components of flexible endoscopes
• Non-damaging to electro-plating
• No adverse impact on dental products tested including amalgam

Independent testing has shown that REPRODIS HLD4i will not harm sensitive instruments including flexible fibre optic instruments.

APPLICATIONS

To prepare 1 litre of REPRODIS HLD4i ready-to-use solution

• Prepare 950ml of water
• Add 50ml of REPRODIS HLD4i concentrate into 950ml of prepared water
• Stir gently to ensure mixing
• Larger quantities can be prepared using the same ratios, e.g. for 5 litres prepare 4750ml of water and add 250ml of concentrate, for 15 litres use 750ml of concentrate and make up to level with water

Rigid endoscopes and other instruments/devices

• Immerse in proteolytic enzyme cleaner and wash clear of all debris
• Rinse thoroughly and dry
• Totally immerse in REPRODIS HLD4i Instrument Disinfectant for recommended time
• Remove and rinse in filtered or sterile water
• Dry and store in approved conditions

Flexible endoscope cleaning and disinfection

• Immerse disassembled endoscope in warm water andproteolytic enzyme cleaner. Wash the outside with disposable sponges or swabs and brush the distal end with a small brush.
• Remove valves, clean and disinfect in REPRODIS HLD4i Instrument Disinfectant for recommended time
• Brush clean the biopsy-suction channel
• Rinse all parts thoroughly and dry
• Totally immerse the scope in REPRODIS HLD4i Instrument Disinfectant for recommended time to achieve high level disinfection
• Rinse thoroughly with filtered or sterile water, as required
• Dry and store in approved conditions
• If the instrument is to be re-used immediately , purge all rinse water from the channels, dry exterior surface with a soft lint-free cloth and re-assemble for use

REPRODIS HLD4I is manufactured in accordance with a Quality management System accredited to ISO9001:2015
It displays none of the harmful characteristics of glutaraldehyde or PHMB based disinfectants and may safely be used as a direct substitute for these without air-conditioning. It is faster-acting, safer to use and more economic in use, with contact time of 10 mins. The non-oxidising formulation is safer for instruments than both peracetic acid and chlorine compound products.

Health and Safety Facts

• Non-sentitising
• Non-fuming
• Non-corrosive to instruments and devices
• Air conditioning not required
• Gloves and eye protection advised

Stability

• Once diluted to the working strength of 5% from concentrate, REPRODIS HLD4i will remain active for up to 7 days, subject to the volume of organic material in the solution. If solution becomes cloudy it should be changed